MacDon 9352c SP - Manual (Page 113)

Form # 147459 Issue 11/06 Web Rev_01 111
MAINTENANCE/SERVICE
Maintenance Schedule
100 HOURS OR ANNUALLY *
1. Clean cab return air filters.
200 HOURS OR ANNUALLY*
1. Change bevel gear box oil.
2. Check power hub lubricant level.
3. Grease caster wheel hub bearings.
4. Check wheel bolt/nut torque.
ANNUALLY*
1. Change fuel tank vent line filter.
2. Check battery fluid level.
3. Check battery charge.
4. Check anti-freeze concentration.
5. Cycle blower switch to distribute A/C refrigerant
oil.
END OF SEASON: See "Storage Procedure" in
Operation section.
300 HOURS
1. Change hydraulic oil filters.
500 HOURS
1. Change engine oil and filter.
2. Change fuel filters.
3. Clean fuel feed pump strainer.
1000 HOURS OR 3 YEARS
1. Change engine air cleaner filter element.
2. Check engine valve tappet clearance.
2000 HOURS
1. Change hydraulic oil.
2.
Change power hub oil. (2000 Hours or
Annually*)
3. Change engine coolant.
4. General engine inspection.
*It is recommended that Annual Maintenance be done prior to start of operating season.