MacDon 9352c SP - Manual (Page 40)

Form # 147459 Issue 11/06 Web Rev_01 38
OPERATION
Stopping Procedure
TO STOP WINDROWER:
WARNING: Do not move variable
speed lever rapidly back to neutral.
Operator may be thrown forward by
sudden stop. Always wear seat belt
when operating windrower.
1.
To slow down and stop the windrower,
SLOWLY return the variable speed lever (A) to
neutral.
2. Turn steering wheel until it locks.
3. Move throttle lever (B) to low idle position.
NOTE: Avoid unnecessary idling. Stop engine if it
will be idling for longer than 5 minutes.
4. Move header drive switch (C) to off position to
stop header drives.
5.
Brakes are automatically engaged when
steering wheel is locked in neutral position.
CAUTION: Park machine on flat level
ground only.
TO STOP ENGINE:
CAUTION: Be sure windrower is
safely parked on a flat, level surface,
header on the ground and the neutral
lock/brakes are engaged.
IMPORTANT: Before stopping engine, run at low
idle for approximately five minutes to cool hot
engine parts (and allow turbocharger to slow down
while engine oil pressure is available).
1. Turn key counter-clockwise to OFF position.
A
B
C
CONTROL LEVERS - STOPPING