Operator’s station, 2 engine-forward lighting - road, 3 cab-forward lighting - road (optional) – MacDon M150 SP User Manual
Page 23
OPERATOR’S STATION
Form 169017 / 169087 / 169095
21
Revision C
5.7.2 ENGINE-FORWARD LIGHTING -
ROAD
The following lights are on / functional when the
switch is in the ROAD position. The hazard lights
must be activated with the switch on the CDM
when driving on the road.
5.7.3 CAB-FORWARD LIGHTING - ROAD
(OPTIONAL)
If equipped, the following lights are functional
when the switch is in the ROAD position. The
hazard lights must be activated with the switch on
the CDM when driving on the road.
IMPORTANT
Optional red tail lighting and marking kit
must be installed so that road travel in the
cab-forward mode complies with road travel
regulations. See your MacDon Dealer.
REAR - ENG FWD
FRONT - ENG FWD
TAIL / BRAKE LIGHTS - RED
TURN SIGNALS / HAZARDS - AMBER
TURN SIGNALS / HAZARDS - AMBER
HIGH / LOW LIGHTS - ROAD
REAR – CAB FWD
TURN SIGNALS/HAZARDS - AMBER
SMV SIGN
OPTIONAL
TAIL LIGHTS – RED
OPTIONAL BRAKE LIGHTS
FRONT – CAB FWD
HI/LO LIGHTS
-ROAD
TURN SIGNALS/HAZARDS - AMBER