MacDon M150 SP - Manual (Page 194)

MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095
192
Revision C
7.11.13 CIRCUIT BREAKERS AND
FUSES
DANGER
Stop engine and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
The circuit breakers and fuses are located inside
the fuse box that is mounted on the frame under
the right cab-forward side platform.
The circuit breakers automatically reset, and the
fuses are the plastic blade type.
Access the breakers and fuses as follows:
a. Stop engine and remove key.
b. Move right cab-forward side platform rearward.
c. Remove wing nut (A), and remove fuse box cover
(B).
d. Refer to decal on inside of cover for identification
of fuses and circuit breakers. See illustration on
next page.
7.11.13.1 Checking / Replacing Fuses
a. To check fuse, pull fuse (C) out of receptacle, and
visually examine.
b. To replace fuse, insert new fuse into receptacle.
IMPORTANT
Replacement fuses should match rating on
decal shown on next page.
7.11.13.2 Replacing Circuit Breakers
a. To replace circuit breaker (D), pull breaker out of
receptacle, and install new circuit breaker.
b. To replace relay (E), pull relay out of receptacle,
and install new relay.
c. Reinstall cover, and secure with wing nut.
(continued next page)
C
B
A
E
D