MacDon M150 SP - Manual (Page 189)

MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095
187
Revision C
IMPORTANT
Do not touch the glass of the halogen bulb
as the oils or other chemicals from your skin
will cause the bulb to fail prematurely.
g. Match slots on new bulb (G) with lugs (J) in optical
unit, and insert bulb into unit.
h. Secure bulb with wire retainer (F).
i. Push wire into connector (H).
j. Position light into light receptacle, ensuring top is
up, and secure with bezel (E) and screws (D).
7.11.5 FLOOD LIGHTS - REAR
DANGER
Stop engine and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
7.11.5.1 Adjustment
The rear floodlights are best adjusted with the
machine in the field or the equivalent to suit
operator preference.
a. Shutdown engine, and remove the key. Turn on
lights.
b. Loosen bolts (A) and (B).
c. Position light to desired position.
d. Tighten bolts (A) and (B).
7.11.5.2 Bulb Replacement
a. Shutdown engine, and remove the key. Turn off
the lights.
b. Remove the two screws (C), and remove light
bezel (K).
(continued next page)
A
B
F
G
H
J
D
E
C
K