Opticon ESL - Manual (Page 9)

Opticon ESL
DEMO KIT
User Manual
9
For example:

Increasing the poll interval lowers the power consumption

Turning off the base stations increases the power consumption

A lower operating temperature increases the power consumption

More display updates per day increase the power consumption
1.8. Serial Number
1.8.1. EBS-10
The serial number can be found on the back of the Base station. The EBS-10 is
currently only available as Engineering Sample, which can be recognized by the
serial number starting with „ES‟. The EBS-10 will soon be replaced by a more
powerful, faster and advanced model with a more sophisticated design.
1.8.2. EE200
The serial number of the ESLs is based on the 16 hexadecimal digits MAC-address
of the RF-module. However, the first 6 digits of the MAC address (00124B) have
been replaced by the letter „A‟.
The default barcode that is shown on the display of the ESL is identical to the bar
code on the back of the ESL.
1.9. Safety
Handle this product carefully. Do not deliberately subject it to any of the following.
1.9.1. Shock
Do not throw or drop the devices
1.9.2. Temperature Conditions
Do not use the devices at temperatures outside the specified range.
Do not pour boiling water on the devices.
Do not throw the devices into the fire.
Do not forcibly bend the cable at low temperatures.
1.9.3. Foreign Materials
Do not immerse the devices in liquids.
Do not subject the devices to chemicals.
1.9.4. Other
Do not plug/unplug the connectors before disconnecting the power.
Do not disassemble this product.
The device may be damaged by power surges