beautypg.com

Opticon ESL User Manual

Page 24

background image

Opticon ESL

DEMO KIT

User Manual




24

When using Windows 7, telnet can be enabled as follows:

Start > Control Panel

Programs And Features

Turn Windows features on or off

Check Telnet Client

Hit OK


Default password „xt‟ then press „N‟ (Network menu)


Only DHCP and IP need to be configured, all other options need to stay as is. If DHCP is
not used please make sure all base stations have a unique IP address and the subnet
mask is set correctly.


Trouble shooting:
When for some reason all network settings have been deleted, for instance when the
‘Factory settings menu’ was used, then the settings can be restored by uploading a
configuration file via ftp. Contact Opticon for the latest configuration file and upload
instructions.