MTS TW Elite - Manual (Page 66)

Run the Finish Section Button on the Review Tab
• You can enter a value for the Maximum Test Runs variable (Define tab > Variables subtab > Maximum
Test Runs). When the number of test runs equals this value, the test will run the Finish section. By
default, this value is set to 9999.
Maximum Test Runs Variable on the Variables Subtab
Internal Name and Display Name
Internal Name
Generally, this is a name that is used internally to the application or by a calculation. These names do not
usually contain spaces and have character restrictions. In some cases, internal names are assigned by
the application and cannot change, and in other cases they are defined by the user and can change.
Because other parts of the system use the internal name, some additional restrictions are in place to make
sure that changing the internal name does not cause the program to fail. In some cases (such as with
variables), the name is adjusted where it can be, but in others (like test resources) it will not allow the
change to take place. These strings do not change when the language is changed.
Display Name
This is a display version of a string. It has some restrictions on allowed characters, but is much more open
than the Internal Names. These strings can be changed by the user without changing any other part of
the application. Some character restrictions apply, and some validation is done so two items at the same
66 | MTS TestSuite
Design Guidelines