12 error messages, 1 short overview of the interbus error messages, Error messages – Lenze E94AYCIB User Manual
Page 49
Lenze · E94AYCIB communication module (INTERBUS) · Communication Manual · DMS 4.0 EN · 02/2014 · TD17
49
12
Error messages
12.1
Short overview of the INTERBUS error messages
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12
Error messages
This chapter supplements the error list for the Servo Drive 9400 contained in the reference manual
and in the »Engineer« online help with the error messages of the communication module.
12.1
Short overview of the INTERBUS error messages
The following table lists all INTERBUS error messages in the numerical order of the error numbers.
Furthermore, the preset error response and - if available - the parameter for setting the error
response are specified.
Tip!
If you click on the cross-reference in the first column, you will get a detailed description
(causes and remedies) of the corresponding error message.
Reference manual/»Engineer« online help for the Servo Drive 9400
Here you will find general information on diagnostics & fault analysis and on error
messages.
Error number
Name
Response (Lenze setting)
Adjustable in
hex
dec
13129009
INTERBUS: No access to the memory
6: Information
-
13129010
INTERBUS: Error while reading the memory
6: Information
-
13129011
INTERBUS: Error while writing into the memory
6: Information
-
13131792
INTERBUS: Internal error
1: No Response
-
13131793
INTERBUS: Internal error
1: No Response
-
13132032
INTERBUS: Internal error
1: No Response
-
13132033
INTERBUS: Internal error
1: No Response
-
13132048
INTERBUS: Internal mapping error
4: Warning locked
-
13132831
INTERBUS: Parameter set invalid
1: No Response
-
13132832
INTERBUS: Lenze setting loaded
1: No Response
-
13140261
INTERBUS: Invalid configuration
5: Warning
-
13140262
INTERBUS: Reset of communication
1: No Response
-
13140263
INTERBUS: Invalid initialisation
5: Warning
-
13140273
INTERBUS: Data exchange stopped
None
/
13140497
INTERBUS: Received process data length is contradictory
5: Warning
-
13140498
INTERBUS: Process data length to be sent is contradictory
5: Warning
-