Black Box 5000 - Manual (Page 130)

Multiserver 5000
128
For additional information on configuring your
port parameters, refer to Section 9.3, Asychronous
Channels
, and for classes, refer to Section 10.8,
Classes .
You may wish to view the async channel
configuration (see Section 10.12, Review
Asynchronous Switching Configuration
) to verify
that the channel has been attached to the class.
ASYNC CHANNEL
SWITCHING PARAMETERS 4
SWITCHING PARAMETERS [DENVER/A5]
CONNECT PROTOCOL 1
SWITCHING PARAMETERS [DENVER/A5]
RESOURCE CLASS 7
SWITCHING PARAMETERS [DENVER/A5]
MAIN MENU M
CONNECT PROTOCOL [DEDICATED]
DTR 2
ENTER TO NODE-ID/CHANNEL#
(^X TO ABORT): DENVER/A5
ENTER RESOURCE CLASS (8 CHARS MAX)
(^X TO ABORT): DTR