INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual - Manual (Page 72)

4 - 10
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
WARNING
Recall and manipulation of very large data files, while
collecting data, may cause the system to slow down. It is
advisable to recall very large data files only when data
collection is idle to lessen the impact on the system
performance.
4.5 Generating Reports
ASCII reports can be generated for data files by using the File >> Generate
Report selection shown in
Figure 4-15 . Reports can be generated for individual
files, live data, or a series of files.
Figure 4-15 Selection for Generating a Report
To generate a report, select File >> Generate Report. If live data are being
displayed or a data file has been Recalled, the dialog in
Figure 4-16 will appear. In
other cases, a standard file Open dialog will appear.