INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual - Manual (Page 56)

3 - 14
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
3.8 Creating a Process (XTC/3M Only)
To create a Process, right-click on one of the processes and select Add/Remove
Layer(s) from the context menu. (See
Figure 3-17 .)
Figure 3-17 Adding a New Process
An Add/Remove Layers to/from Process window will be displayed (see Figure
3-18 ).
Figure 3-18 Add/Remove Layers to/from Process Interface
To add a layer(s), select the film(s) in the Films side and press the >> button. The
corresponding layer(s) will then appear in the Layers side. (See
Figure 3-19 .)