INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual - Manual (Page 16)

1 - 4
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
1.3 Inventory Of Supplied Items
You should have one CD ROM (or may have floppy disks) which contain the XTC/3
Editor program and online Operating Manual.
1.4 Computer System Minimum Requirements
The XTC/3 Controller and Communications Interface must meet the requirements
shown in the following sections.
Table 1-1 Computer System Minimum Requirements
Recommended for
communication with
one XTC/3 Controller
Recommended for
communication with up
to 4 XTC/3 Controllers
(more than 4, consult
factory)
Processor Pentium ® III
550 MHz or greater
Pentium 4
3.2 GHz or greater
RAM 512 MB or greater 2 GB or greater
Hard Disk space to
load XTC/3Editor 15 Mb 15 MB
Hard Disk Space for
storage 20 GB (see Note below) 60 GB (see Note below)
Disk Drives (1) Floppy, (1) CD (1) Floppy, (1) CD
Monitor 15 inch, SVGA or greater 15 inch, SVGA or greater
Resolution 1024 x 768 or greater 1024 x 768 or greater
Communications One RS-232 port or one
Ethernet card One Ethernet card
Operating System Windows 2000 or XP
NOTE: Data files should be archived and removed periodically as a maintenance
step to provide storage space for ongoing data collection.