beautypg.com

INFICON SQM-242 Thin Film Deposition Controller Card Operating Manual User Manual

Page 53

background image

6 - 7

IP

N 07

4-

54

9-

P1

A

SQM-242 Operating Manual

To run the LabVIEW demo, click "Load DLL", "Use Card" and then set the Sensor
and Output parameters as desired. Click "Start Readings" to display readings. Be
sure to click "Unload DLL" before stopping the LabVIEW program. Otherwise, a
Windows error will occur, and LabVIEW may shut down. LabVIEW 6 or higher is
required.