INFICON SQM-242 Thin Film Deposition Controller Card Operating Manual - Manual (Page 20)

1 - 8
IP
N 07
4-
54
9-
P1
A
SQM-242 Operating Manual
1.4.8 Operating Environment
Usage. . . . . . . . . . . . . . . . . . . . . . . . Indoor only
Temperature . . . . . . . . . . . . . . . . . . . 0 to 50°C (32-122°F)
Humidity . . . . . . . . . . . . . . . . . . . . . . 0 to 80% RH. @ 31°C, non-condensing
Altitude . . . . . . . . . . . . . . . . . . . . . . . 0 to 2000 m
Installation (Overvoltage) . . . . . . . . . Category II
Measurement Category . . . . . . . . . . II
Pollution Degree. . . . . . . . . . . . . . . . 2
Equipment Type . . . . . . . . . . . . . . . . Class 1 (grounded type). Suitable for
continuous operation
Protection . . . . . . . . . . . . . . . . . . . . . Not protected against harmful ingress of
moisture
1.4.9 Storage Temperature
Storage Temperature . . . . . . . . . . . . -40 to 70°C (-40 to 158°F)
1.4.10 Warm Up Period
Warm Up Period. . . . . . . . . . . . . . . . None required;
For maximum stability allow 5 minutes.
1.4.11 Size
Not including user connectors
4.21 in. L x 5.91 in. W
(107 mm L x 150 mm W)
1.4.12 Connector Clearance Requirements
Rear . . . . . . . . . . . . . . . . . . . . . . . . . Less than 4.0 in. (102 mm)
1.4.13 Weight
1 card . . . . . . . . . . . . . . . . . . . . . . . . 0.2 kg / 0.4 lb.