INFICON Helium Leak Detector Modul1000 - Manual (Page 11)

Important safety instructions
2-1
jinb
80
e1
-h
Op
er
at
in
g M
a
nua
l
(1
01
1)
2 Important safety instructions
2.1 Intended use
The Modul1000 is intended to be used for the leak test under vacuum. With the
sniffer version of Modul1000 (Catalogue-No. 550-310), it is also possible to locate
leaks in the test sample.
The Modul1000 may only be used for leak tests with helium and hydrogen. It may
only be used in dry rooms and on dry surfaces.
Only use INFICON accessories.
The intended use includes:
• the compliance with the technical data and the ambient conditions,
• the use of standard and original accessories,
• consideration of this documentation and the observation of the included
instructions and directives.
2.2 User requirements
The Modul1000 must only be connected and operated by properly trained staff.
• Get used to the functioning of the device. Only connect and operate the device
after reading and understanding the manual.
• Consult local, State, and national agencies regarding specific requirements and
regulations.
• Address any further safety, operation and / or maintenance questions to our
nearest office.