HYDAC CSI-F-10 - Manual (Page 70)

GSM Radio Module CSI-F-10 Page 70
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
8.1 Menu Bar
The menu bar of the CM Editor is tailored to the MS Windows user interface and
contains the following menu structure:
8.1.1 File
• With "New", you can establish for which platform (CM device) the CM program
is to be created before starting to create the CM program. The program
functions which are not available for the selected platform will be grayed out in
the Functions window and cannot be used during program generation.
• With "Platform", you can establish for which platform (CM device) the CM
program is to be created during the creation of a CM program. The program
functions which are not available for the selected platform will be grayed out in
the Functions window and cannot be used during program generation.
• Pressing "Open" allows you to open an already generated and stored CM
program. CM programs have the file extension *.hecmp. Select the required file
in the corresponding path.
• Select "Save" to save a CM program. If the recording has not yet been saved,
the “Save as…“ window will open. Enter the required file name in the
corresponding path.
• To save a file that has not yet been saved or to save a file that has already
been saved under a different name, select "Save as ...". Enter the required file
name in the corresponding path.
• To integrate an existing program that has already been saved into the current
program generation process, select "paste from file". Select the required file in
the corresponding path.
• Press "Print" to print out the content of the Linked functions window
(= program printout).
• Press "Exit" to close the CM Editor.