HYDAC CSI-F-10 - Manual (Page 115)

GSM Radio Module CSI-F-10 Page 115
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
11.6 Cycle Time
The CSI-F-10 identifies the required cycle time automatically when the program starts.
The user has the option of having the current cycle time displayed on the CM Editor.
The minimum cycle time amounts to 500 ms.
11.7 Operating and Ambient Conditions
Operating temperature: -10.. .. +55 °C (GSM 1800 / 1900)
-20 ... +55 °C (GSM 850 / 900)
Storage temperature: -30 .. +65°C
Relative humidity: 0 .. 70%, non-condensing
11.8 Dimensions and Weight:
Dimensions: approx. 145 x 95 x 55 mm (B x H x D) without antenna
Weight:
approx. 350 g
11.9 Technical Standards
EMC: Conformity with R&TTE Directive 1999/5/EC, EN 61000-6-1/2/3/4
Safety: EN 60950 / EN 61010
Protection class: IP 65
11.10 Items supplied
The CSI-F-10 is packed in a box and is supplied ready-for-operation. Prior to
installation, check the packaging and the device for transit damage and ensure that all
the parts are present.
- CSI-F-10 (incl. 90° angle antenna and 2.5 m wire antenna)
- User manual
- CD-ROM with the PC software "CMWIN" as well as additional product information
11.11 Maintenance and cleaning
- De-energize the CSI-F-10 and verify that it is free of voltage.
- For reasons of electrical safety, never clean the device with water or other fluids,
and under no circumstances whatsoever should the device be immersed in water or
other fluids.
- Use only a dry, lint-free cloth for cleaning. Do not use any solvents, gasoline or
similar, as these would damage the CSI-F-10.