Comelit RAS_SOLUTION - Manual (Page 83)

76
Chapter 13 – Emap View
This describes how to operate the Emap view and functions. It supports multi-layered Emap view. 36
maps are able to be loaded in the Emap View at the same time. Each map MAY have link(s) of other
map(s) and sensor(s).
Figure 80 Emap View
13.1 Emap View
To design Emap, please refer the ‘3.7 System Setup – Emap’.
Click the Emap tab. The Emap view has all functions of Live1 except layout view. The layout view shows
the Emap.
13.1.1 Emap and live view
1) Emap view
① Select a layout from the device tree.
② Click left mouse button and drag it into a screen in the Emap view.
③ If the map was designed for that layout, then the map would be shown. Otherwise, it shows default
map background and devices.
2) Live view from map
① Select a device from the map.