Comelit RAS_SOLUTION User Manual

Page 39

2) Automatic logout

To logout automatically without asking for user confirmation, check the Enable automatic logout without
checking user information. Otherwise, uncheck it.

6.1.3 Abnormal termination

There is a possibility that if the software client is terminated without the correct procedure, the next time
you start the client, you MAY receive a message of abnormal termination. If this is checked, even though
there is any abnormal termination, the last user who logged in will remain logged in and the last Live1,
Live2 views will be restored automatically (without message checking).

6.1.4 System Update

This is an automatic check for software updates. Checking will be done automatically, but updating
software needs user confirmation. This is to configure updating server and method.

① Check the Automatic Check and select the time.

② Enter the update server URL (for example, http://192.168.0.1/liveupdate/Comelit RAS Solution)

③ If the update server requires a user ID and password for accessing, check the user ID/password to
login the update server.

④ Click the Check button to access the server.

Table 9 Live Update Check

After Starting Up

Whenever any administrator level user logs in

Before Closing

Before the software closing

All

After Starting Up and Before Closing

* Please consult the updating server with the network administrator or software installer.

6.1.5 Retention Logs

This option will dictate how many logs will be kept in the system. The default value and maximum is 8000.
If you change the maximum value, the oldest logs would be removed. And the removed logs are not
recoverable.

6.1.6 Camera Default Setting

This option determines default protocol for camera connection among UDP, TCP, or HTTP.

6.1.7 BackUp

1) Export

This option stores information of device, storage, layout, channel display sequence, layout sequence, and
favorite. When you click Export button, “Save As” dialog box will appear. Determine path and file name,
and click Save button, then Export operation will start.