1 event operations – Comelit RAS_SOLUTION User Manual
Page 30

23
4.1.1 Event operations
① Select the Device tab.
② Select a device from the device tree.
③ Select an event type to set up from the combo-box.
④ Enable/Disable the selected event operation from the list.
⑤ Set up the event operations.
⑥ If you want to apply the same operations to other devices, select the Apply to button and select
device(s)/group(s).
Table 8 Device Event Operations
Event Operations
Options
Settings
Enable
Yes/No
Enable/Disable the event operations
View Channel
Dwell Time
Amount of time to display the event channel
Live View
What view to show the event channel on Live1,
Live2, Emap and All.
View Layout
Dwell Time
Amount of time to show the layout
Layout
What layout to show in the Event view
Sound
Enable
Enable/Disable the sound
File
Select the sound file, otherwise the default sounds
will be automatically be initiated
Record
Dwell Time
Event Recording independent on schedule
Preset
Preset ID
In the case of PTZ, move the preset
Manual Trigger
Trigger ID
If it supports manual trigger, it will trigger
Run External Exe
File
Execute an external application
Event Relay
Relay Out List
Select the Relay Out
* The Record operation in the device event list only affects the recording schedule. For example, if there
is a device which is configured that there is no recording (time/event) schedule from 9:00 AM to 10:00 AM.
If an event which operation is recording, is happened during that time, it would be recorded as configured
with above setting value.
* The Relay Out has the similar configurations of the device event. Please do not configure relay chains.
(For example, a manual trigger of device A relays a manual trigger of device B. And manual trigger of
device B relays manual trigger of device A. It makes relay chain continuously. It MAY cause endless event
operations)
* The View Channel option needs event channel setting on the Live1, Live2 and Emap. If there is no event
channel setting on them, it will not work.
* The Dwell Time values of the View Channel and View Layout have a minimum time out of 5 sec. If
another event occurs, the view channel and layout MAY be preemptive even though the value is over 5
seconds.