COATS Series XR 1800 Balancer - Manual (Page 4)

iv • Important: Always read and follow the on-screen operating instructions.
Safety
Safety Notices and Decals
Failure to follow danger, warning, and caution
instructions may lead to serious personal
injury or death to operator or bystander or
damage to property. Do not operate this
machine until you read and understand all the
dangers, warnings and cautions in this man-
ual. For additional copies of either, or further
information, contact:
Hennessy Industries, Inc.
1601 J.P. Hennessy Drive
LaVergne, TN 37086-3565
(615) 641-7533 or (800) 688-6359
www.ammcoats.com
The Lateral Runout unit of this machine contains a
Class IIIa laser with a maximum output less than 5mW
at a wave length of 650-670 nm. Avoid Exposure -
Laser radiation is emitted from its aperture.
Use of controls, adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.
There are NO service procedures or adjust-
ments which can be performed on the laser
in this product.
In case of failure, the entire lateral runout unit
(part no. 80180126) must be replaced.
CAUTION
WARNING