COATS Series XR 1800 Balancer - Manual (Page 14)

8 • Important: Always read and follow the on-screen operating instructions.
Video Balancer
Sensor Measuring Systems
By lowering the hood, measure wheel width auto-
matically using the Tire Width Sensor. See figures 10
and 11.
Figure 10 - Tire Width Sensor
Figure 11 - Screen with Width Sensor Icon
The sensor, shown in figure 12, is mounted on an
adjustable slide at rear of machine and is used to
measure radial runout of the tire when the eye of the
sensor is centered on the tread width.
Important: To activate the radial runout function,
press the button, select the GENERAL SET-UP
option , and set the RUNOUT UNLOADED
option to SONAR.
Figure 12 - Radial Runout Sensor
The sensor, on especially equipped models, (shown
in figure 13) is mounted on an adjustable slide and is
used to measure lateral runout of the tire when the eye
of the sensor is centered on the flat of the tire side-
wall.
Important: To activate the lateral runout function,
press the button, select the GENERAL SET-UP
option , and set the RUNOUT UNLOADED
option to SONAR.
Figure 13 - Lateral Runout Sensor
6
5
MENU
7
5
MENU
Lateral Runout
Sensor
Tire Width Sensor