COATS Series XR 1800 Balancer - Manual (Page 20)

Balancer Function Set-
up and Review
See the Menu Screen Flowchart on page 12 and 13 for
screen access information.
Indicates recommended settings.
General Set-up
Press the key and select the GENERAL SET-UP
option for the following menu selections.
Figure 20 - General Set-up Screen
Language - Toggle to display English, Español, or
Français.
Set to ENGLISH.
Screensave time - Set from 1 to 10 minutes @ 1
minute increments.
Clock setting - Set the month, day, year, hour,
minutes, day, and 12/24 hour clock.
Figure 21 - Clock Setting Screen
Video sleep mode time - Set the range from 0
through 60 minutes.
Set to 60 min.
Excessive Static Unbalance - Toggle ON or OFF to
detect whether the static unbalance limit is
exceeded.
Set to ON.
Printer - Toggle ON or OFF to set the printer,
owner address, spin no., operator no., vehicle tag
no., loc. on vehicle, and corrected options.
See PRINTER on page 9 for further details.
Figure 22 - Printer Screen
Runout - Set runout options from this menu.
Figure 23A - Runout Screen
Runout Unloaded - (lateral) toggle to
OFF or SONAR. Set to OFF for the XR
1800 Model! Set to ON for the XR
1850 Model!
Runout Unloaded - (radial) toggle to
set to OFF or SONAR. Set to SONAR.
Runout Diagnostic - Toggle ON or OFF.
See MATCHING pg. 20 for further details.
Runout Limits - Tolerances that indicate
the limit of runout allowed on the
tire/wheel. Set tolerances within the fol-
lowing range:
Note: See MATCHING on page 20 for further details.
4
3
2
1
7
6
5
4
3
2
1
5
MENU
14 • Important: Always read and follow the on-screen operating instructions.
Video Balancer
Shown with Recommended Settings
Shown with Recommended Settings