COATS Kit 8113592, Wheel Lift Link - Manual

Wheel Lift Link 8113592
for 950, 10xx, 1250 & XR Series balancers
COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3564
(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX
XR Machines
XR Machines
1250 Machines XR Machines
XR Balancers
5/16-18x1 1/2 Washer HD. Screw
Zee Bracket
5/16-18 Serrated
Lock Nut
950/1050/1250
Balancers
950/1050/1250
Balancers
950/1050/1250
Style Machines
950/1050 Style
Machines
Spacers (4) (if required)
8112745 02 11/07 © COPYRIGHT 1999 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
1. Remove fasteners from hardware package.
2. Install 5⁄16-18x1-1/2" large washer-head screw in
the appropriate holes for your balancer, head down
(see illustration).
3. Loosely secure screws with 5⁄16-18 nuts.
4. Position plate on the floor, screw heads down.
5. Position balancer legs in appropriate leg positioning
holes.
6. Remove 5⁄16 lock nuts, and position the lift over the
5⁄16 screws toward the rear of the plate. Secure with
lock nuts.
7. Install the zee bracket over the screws at the front of
the plate, to clamp the front of the lift to the plate.
Secure with lock nuts. Use spacers as required
between the plate and the zee bracket to match the
height of the lift base.