Video balancer, Balancing set-up, Special functions – COATS Series XR 1800 Balancer User Manual
Page 21
Important: Always read and follow the on-screen operating instructions.
• 15
Video Balancer
Select RUNOUT LIMITS option
for runout menu:
Max. True Runout Limit - Tolerance
that indicates the limit of runout
allowed on the tire/wheel.
Rim Runout Limit - Tolerance that
indicates runout limit allowed on rim.
Correction Runout Limit - Tolerance
that indicates the limit of runout
allowed on the tire/wheel.
Figure 23B - Runout Limits Screen
Balancing Set-up
Press the
key and select the BALANCING SET-
UP option
for the following menu selections.
Figure 24 -
Balancing Set-up Screen
Display Units - Toggle to set OZ (ounce) or G
(gram) weight measurements.
Lower Weight Limit - Set the limit within the fol-
lowing tolerances:
0.13 - 0.50 oz (ounces) @ 0.01 increments
4 - 10 g (grams) @ 1 gram increments
Note: The closer the Lower Weight Limit is set to
0.13 oz (4 g) the more respins you will have when
attaching 0.25 oz (5 g) weights.
Calculation Roundoff - Toggles the display of wei
ght corrections roundoff from 0.25 OZ (most whe
els) to 0.50 OZ (heavy wheels).
Start by Lowering Hood - Toggle ON or OFF.
Sound Signal - Toggle ON or OFF. Enable for an a
udible beep when a
key is pressed, dimensions are acquired (automat
ic mode), correct weight placement is reached (m
easurement screen), and correct weight applicati
on point is reached (positioning screen).
Econo Balance Lower Weight Limit (if feature
is available and enabled) - Set limit within the
following tolerances:
0.20 - 0.90 oz (ounces) @ 0.01 increments
4 - 25 g (grams) @ 1 gram increments
Special Functions
Press the
key and select the SPECIAL FUNC-
TIONS option
for the following menu selections.
Figure 25 - Special Functions Screen
Customize the machine by following the on-screen
instructions for functions
and/or
.
Owner Address - This information appears on the
screensaver. It consists of three lines, each a
maximum of 30 characters.
Operators Name - Enter up to four different
machine user names, each a maximum of 15
characters. Follow the on-screen instructions to
complete the customization.
Figure 26 - Operator Name Entry Screen
2
7
5
1
1
2
7
MENU
4
3
3
4
2
1
2
1
6
MENU
Shown with Recommended Settings
Shown with Recommended Settings
Shown with Recommended Settings