CHAMPION USN10 - Manual (Page 23)

5
PART 2: INSTALLATION
In This Part—
• Unpacking the dishwasher
• Making Utility Connections
2.1 Unpack the Dishwasher
NOTE:
The installation of your dishwasher must meet all applicable health and safety codes
and conform to good trade practice.
Your USN-10 was completely assembled, inspected, and thoroughly tested at our factory
before shipment to your installation site.
• The dishwasher with booster are shipped on a single pallet.
• The booster is connected to the dishwasher.
Perform the following steps to unpack the dishwasher:
1. Remove protective wrap and hold downs from the pallet.
2. Inspect for any shipping damage. If damage is found, save the packing material
and contact the carrier immediately.
3. Check the interior of the dishwasher for the following items stowed inside:
- 1 set of flanged feet
- 1 set of dishracks
- Warranty information packet
CAUTION:
Check piping mounted underneath dishwasher before lifting to avoid damaging the
machine.
!
PART 2: INSTALLATION