CHAMPION UL-130 Manual - Manual (Page 41)

31
Model UL130 - Initial Start-up
Initial Start-up Check List - UL130
1. Remove any protective film from dishwasher and check the interior for foreign material.
2. Make sure the dishwasher is permanently located.
3. Make sure all utility connections are complete.
4. Make sure the flexible drain hose and the hot water fill hose are not kinked.
5. Make sure the chemical supply containers are full and the chemical pick-up tubes
are installed in the proper containers.
6. Make sure the scrap screen is in place.
7. Make sure the spray arms are in place and spin freely.
8. Close the dishwasher door.
9. Turn the hot water supply on and check for leaks in the main water supply piping
connected to the dishwasher.
Model UL130 Wash Tank
Scrap
Screen
Wash
Arm