CHAMPION UL-130 Manual - Manual (Page 18)

8
Installation - Model UH130, UH130B, UH230, UH230B
! ATTENTION !
Do not connect the drain hose to a disposer. The dishwasher will not drain correctly.
The dishwasher flexible drain hose
must be connected to a WYE fitting.
Do not connect the dishwasher flexible
drain hose to a TEE fitting.
3. The drain hose is located at the rear of the dishwasher, and is secured to the rear of the
machine by a clamp to maintain a goose-neck bend in the drain hose.
4. Install the drain hose to a "WYE" drain fitting. Connection to a "TEE" fitting will
prevent the dishwasher from draining completely.
5. The maximum drain flow is 15 US gpm.
6. Make sure the drain hose does not kink.
Kinks may prevent the dishwasher
from draining completely.
Drain Connections -
UH130, UH130B, UH230, UH230B (continued)
! VERY IMPORTANT !
Draining Problems Related Improper Installation.
Problems with machine draining are often the result of improper installation. The drain hose
is looped and clamped as shown in the photo below and must not be changed.
DO NOT REMOVE THE DRAIN
HOSE
RETAINING CLAMPS.
DO NOT STRETCH THE DRAIN
HOSE.