CHAMPION UL-130 Manual - Manual (Page 19)

9
Model UH130, UH130B, UH230, UH230B - Initial Start-up
Initial Start-up Check List
UH130, UH130B, UH230, UH230B
Make sure the scrap screen is in place.
For Model UH230B only:
Make sure the overflow guard is in place.
1. Remove any protective film from dishwasher and check the interior for foreign material.
2. Make sure the dishwasher is permanently located.
3. Make sure all utility connections are complete.
4. Make sure the flexible drain hose and the hot water fill hose are not kinked.
5. Make sure the chemical supply containers are full and the chemical pick-up tubes
are installed in the proper containers.
6. Make sure the scrap screen is in place.
7. Make sure the spray arms are in place and spin freely.
8. Close the dishwasher door.
9. Turn the hot water supply on and check for leaks in the main water supply piping
connected to the dishwasher.
For Model UH230B only:
Make sure the overflow guard is in place.