Chapter 1. introducing the display system – Auto Meter 6002 User Manual
Page 7

Chapter1. Introducing the Display Systems
Street Dash Users Guide
1
Chapter 1. Introducing the Display
System
The Auto Meter Street Dash Display System monitors and
displays a range of values, known as performance parameters,
needed for effective car and driver management in most driving
situations.
The display combines an analog tachometer with a digital
display for the following performance parameters:
1. Vehicle speed (MPH)
2. Engine speed (RPM)
3. Oil pressure
4. Oil temperature
5. Water temperature
6. Fuel Pressure (optional)
7. Fuel level (0-1.3K Ohms)
8. Battery Voltage
9. Lap times (last completed and best)
You can view the peak values (tell-tales) for all the parameters.
This system provides a red alarm light to alert the driver that a
warning condition has been detected. The warning conditions are
based on preset alarm values for the following performance
parameters:
1. Low oil pressure
2. High oil temperature
3. High water temperature
4. Low fuel pressure
5. Fuel level.
The fuel level alarm is indicated by the amber warning
light; the unit does not display any message for the fuel
level alarm.
6. Low Battery voltage