Auto Meter 6002 - Manual (Page 58)

Appendix C. Summary of Switch Functions
52 Street Dash Users Guide
Appendix C. Summary of Switch
Functions
Normal Operation
Switch or
Switches Functions
Switch 1 Show the peak values
Switch 2 Clear Alarm or Show Last Alarm
Switch 3 Clear Alarm or Change Display Layer
Switch 4 Reset the trip distance to zero and start the lap
timer. The trip distance is reset after each lap.
Switches 1 & 2
together Put system into configuration mode.
Switches 1 & 4
together Reset the peak values and lap times.
System Configuration Mode
Switch or
Switches Functions
Switch 1 Decrease the alarm value of the parameter being
displayed
Switch 2 Increase the alarm value of the parameter being
displayed
Switches 1 &
2 together Enable or disable an alarm for the parameter
being displayed
Switch 3 Display the next configurable parameter
Switches 1 &
2 together Enter Fuel Calibration mode (when applicable)
Switch 4 Exit configuration mode and return to normal
operation mode
Fuel Calibration Mode
Switch or
Switches Functions
Switches 1 &
2 together Enter Fuel Calibration mode
Switch 1 Decrease tank quantity value
Switch 2 Increase tank quantity value
Switch 3 Confirm value
Switch 4 Cancel and leave original calibration set