AirLive WN-300ARM-VPN - Manual (Page 80)

6.9 QoS
The QoS (Quality of Service) feature allows you specify priorities for different traffic. Lower priority traffic will
be slowed down to allow greater throughput or less delay for high priority traffic.
An example QoS screen is shown below.
Figure: QoS Screen
-1- Data - QoS Screen
QoS Setting
QoS Setting To disable QoS (Quality of Service), keep the default setting, Disable. To
enable QoS (Quality of Service), click Enable and follow these instructions.
Management
Type
There are 2 options:
 Rate Control - The QoS will be managed by the size of the bandwidth.
 Priority - The QoS will be managed by the priority.
(1-1) WAN Setting
DownStream Enter the desired value for the DownStream Connection.
UpStream Enter the desired value for the UpStream Connection.
Get from WAN Click this button to get the values for DownStream and UpStream from WAN.
AirLive WN-300ARM-VPN User’s Manual 78