AirLive WN-300ARM-VPN - Manual (Page 103)

AirLive WN-300ARM-VPN User’s Manual 101
IP Address Select the appropriate option:
 Automatic - The PC is set to be a DHCP client (Windows: "Obtain an IP
address automatically"). The WN-300ARM-VPN will allocate an IP address
to this PC when requested to do so. The IP address could change, but
normally won't.
 DCHP Client - Reserved IP Address - Select this if the PC is set to be a
DCHP client, and you wish to guarantee that the WN-300ARM-VPN will
always allocate the same IP Address to this PC.
Enter the required IP address. Only the last field is required; the other
fields must match the WN-300ARM-VPN's IP address.
 Fixed IP Address - Select this if the PC is using a Fixed (Static) IP
address. Enter the IP address allocated to the PC. (The PC must be
configured to use this IP address.)
MAC
Address
Select the appropriate option
 Automatic discovery - WN-300ARM-VPN will contact the PC and find its
MAC address. This is only possible if the PC is connected to the LAN and
powered on.
 MAC address is - Enter the MAC address on the PC. The MAC address is
also called the "Hardware Address", "Physical Address", or "Network
Adapter Address". The WN-300ARM-VPN uses this to provide a unique
identifier for each PC. Because of this, the MAC address can NOT be left
blank.
Buttons
Add as New
Entry
Add a new PC to the list, using the data in the "PC Properties" box.
If "Automatic discovery" (for MAC address) is selected, the PC will be sent a
"ping" to determine its hardware address. This will fail unless the PC is
connected to the LAN, and powered on.
Update
Selected PC
Update (modify) the selected PC, using the data in the "Properties" box.
Clear Form Clear the "Properties" box, ready for entering data for a new PC.
Refresh Update the data on screen.
Standard
Screen
Click this to view the standard "PC Database" screen.