AirLive WN-300ARM-VPN - Manual (Page 75)

6.6 Port Trigger
If you use Internet applications which use non-standard connections or port numbers, you may find that they
do not function correctly because they are blocked by the WN-300ARM-VPN's firewall. In this case, you can
define the application as a "Port Trigger".
The Port Trigger screen can be reached by clicking the Port Trigger on the screen.
You can then define your Port Trigger. You will need detailed information about the application; this is normally
available from the supplier of the application.
Also, note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC)
viewpoint
Figure: Port Trigger Screen
-1- Data - Port Trigger Screen
Port Trigger
Enable Use this to Enable or Disable this Special Application as required.
Name Enter a descriptive name to identify this Special Application.
AirLive WN-300ARM-VPN User’s Manual 73