AirLive WN-300ARM-VPN User Manual

Page 52

Select the SSID for the WN-300ARM-VPN, and click Configure, to see a screen like the following:

Figure: Wireless Network Properties - WEP

Configure this screen as follows:

 Set

Network Authentication to match the WN-300ARM-VPN. (If the setting on the

WN-300ARM-VPN is "Auto", then either Open or Shared can be used.)

 For

Data Encryption, select WEP.

 For the Network key and Confirm network key, enter the default key value used on the

WN-300ARM-VPN. (Windows will determine if 64bit or 128bit encryption is used.)

 The

Key index must match the default key index on the WN-300ARM-VPN. The default value is 1.

 Ensure the options The key is provided for me automatically and This is a

computer-to-computer (ad hoc) network are unchecked.

 Click OK to save and close this dialog.

 This wireless network will now be listed in Preferred Networks on the screen below.

AirLive WN-300ARM-VPN User’s Manual