AirLive WN-300ARM-VPN User Manual

Page 18

AirLive WN-300ARM-VPN User’s Manual

4. When prompted for the User name and Password, enter values as follows:

 User name

admin

 Password

airlive

Notes:

If you can't connect:

If the WN-300ARM-VPN does not respond, check the following:

 The WN-300ARM-VPN is properly installed, LAN connection is OK, and it is powered ON. You can test

the connection by using the "Ping" command:

 Open the MS-DOS window or command prompt window.

 Enter the command:

ping 192.168.0.1

If no response is received, either the connection is not working, or your PC's IP address is not

compatible with the WN-300ARM-VPN's IP Address. (See next item.)

 If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to

192.168.0.254 to be compatible with the WN-300ARM-VPN's default IP Address of 192.168.0.1. Also, the

Network Mask must be set to 255.255.255.0.

 Ensure that your PC and the WN-300ARM-VPN are on the same network segment. (If you don't have a

router, this must be the case.)

Ensure you are using the wired LAN interface. The Wireless interface can only be used if its configuration

matches your PC's wireless settings.