AirLive WN-300ARM-VPN User Manual

Page 46

Figure: TCP/IP Properties (Windows Vista)

5. Ensure your TCP/IP settings are correct.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows

setting. To work correctly, you need a DHCP server on your LAN.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured for a fixed (specified) IP address, no changes are required.

(The Administrator should configure the Wireless Access Point with a fixed IP address from the same address

range used on the PCs.)

Internet Access

To configure your PCs to use the WN-300ARM-VPN for Internet access:

 Ensure that the DSL modem, Cable modem, or other permanent connection is functional.

 Use the following procedure to configure your Browser to access the Internet via the LAN, rather than

by a Dial-up connection.

-1-

For Windows 2000

1. Select

Start Menu - Settings - Control Panel - Internet Options.

2. Select the Connection tab, and click the Setup button.

AirLive WN-300ARM-VPN User’s Manual