AirLive WN-300ARM-VPN - Manual (Page 110)

7.6 Remote Administration
If enabled, this feature allows you to manage the WN-300ARM-VPN via the Internet.
Figure: Remote Administration Screen
-1- Data - Remote Administration Screen
Remote Administration
Enable Remote
Management
Check to allow administration/management via the Internet. (To connect,
see below).
If Disabled, this device will ignore Administration connection attempts from
the Internet.
Current IP
Address
This is the current address you will use when accessing this device from
the Internet. To connect, see details and an example below.
Port Number Enter a port number between 1 and 65535. The default for HTTP (Web)
connections is port 80, but using port 80 will prevent the use of a Web
"Virtual Server" on your LAN. So using a different port number is
recommended. The default value is 8080.
The port number must be specified in your Browser when you connect. See
the following section for details.
Access Permission
Allow Remote
Access
Select the desired option.
 Everyone - allow access by everyone on the Internet.
 Only This Computer - allow access by only one IP address. Enter the
desired IP address.
 IP Address Range - allow access from a range of IP addresses on the
Internet. Enter a beginning and ending IP address to define the allowed
range.
AirLive WN-300ARM-VPN User’s Manual 108