AirLive WN-300ARM-VPN - Manual (Page 62)

Connection Status - PPPoE & PPPoA
If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following example will be
displayed when the "Connection Details" button is clicked.
Figure: PPPoE Status Screen
-2- Data - PPPoE/PPPoA Screen
Connection
Time
This indicates how long the current connection has been established.
Connection to
Server
This indicates whether or not the connection is currently established.
 If the connection does not exist, the "Connect" button can be used to
establish a connection.
 If the connection currently exists, the "Disconnect" button can be used to
break the connection.
Negotiation This indicates the status of the PPPoE Server login.
IP Address The IP Address of this device, as seen by Internet users. This address is
allocated by your ISP (Internet Service Provider).
Network Mask The Network Mask associated with the IP Address above.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Close Close this window.
AirLive WN-300ARM-VPN User’s Manual 60