2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 92)

Technical Parameters 5.1
92
Phone Interface
Interface type 2wire analogue FXS
Telephone connector type RJ 12, 6/2
Call impedance Adjustable worldwide, default 600 W
Loop voltage 48 V DC
Loop current Max 20 mA
Tone frequency Adjustable, default 425 Hz
Dialling type Tone (DTMF) and pulse
Ringing voltage 42 Vrms 10–60 Hz
Calling line identification CLIP during ringing according to ETSI FSK
Tariff pulses f=16/12 kHz
Answer supervision 12/16 kHz pulses
Ethernet Switch
Interface type 4-port Gigabite Ethernet switch
Connector RJ-45
WiFi
Band 2,5 / 5 GHz
Standard 802.11a/b/g/n
Security WEP, WPA, WPA2, WPA+
Others
Dimensions (w/o
connectors)
170Ч130Ч45 mm
Operating temperature 0° C to 45° C
Operating status signalling
8x LED (On; Network status, WiFi status; Line, signal
strength)