2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 43)

Table of Programmable Parameters 3.2
43
Enable
Enable/disable the use of the Flood function.
Port
Set the port to which stimulation packets should be sent.
Packet size
Set the size of the stimulation packet.
Period
Set the time intervals for stimulation packet sending.
Tip
n The Flood function has been developed to compensate the initial data
transmission slowness in the UMTS network. Thus, 2N ® EasyRoute sends
stimulation packets at preset intervals to achieve the optimum data flow
at initial stages of bulk data transmissions. The default value is Enabled.
n Do not disable this function to avoid connection errors at the beginning of
VoIP.
VoIP
Setting of parameters for voice connection using VoIP technology.
Echo cancelation
Enable or disable the echo cancelling function (Line Echo Canceller).
RX gain
Set the gain for the receive path.
Setting options: -24 to 24 dBms
Setting step: 1 dBms
Default setting: 0 dBms
TX gain
Set the gain for the transmit path.
Setting options: -24 to 24 dBms
Setting step: 1 dBms
Default setting: 0 dBms
Jitter
Set the buffer jitter capacity.
Setting options: Fixed/Adaptive
Baby Call
An off-hook initiates the countdown defined in the Dialling timeout parameter. If
no dialling is made within this timeout, the pre-set telephone number is dialled