2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 35)

Table of Programmable Parameters 3.2
35
Last erase
Displays the system time at which the counter was reset for the last time. From
this time on, the next resetting period as set in the Reset period parameter is in
progress.
Next erase
Displays the system time at which the counter will be reset for the next time. This
time depends on the Reset period and Last reset parameters.
Note
n If you set multiple FUP limit parameters, e.g. Download and Time, the
more exhausted limit is displayed in the STATUS menu. For example, if
the Download use is 38% and the Time use is 87%, then the STATUS
page will show 87%.
Services
Enable GSM character set
Here enable/disable the GSM character set for SMS coding. This option is
automatically ticked off if none of the coding sets is selected.
Enable UCS2 character set
Here enable/disable the UCS2 (Unicode) character set for 16-bit SMS coding.
Enable multipart SMS
Here enable/disable sending of multipart SMS messages. A multipart SMS means
a message longer than 160 characters without or 70 characters with diacritic
symbols and special characters.
SMS database limit
Here set the maximum size of the SMS storing database. After the database is
filled up, incoming SMS messages are stored on the inserted SIM card and no
more SMS are sent and/or received. The user is notified of this fact by an error
message while sending SMS.
Setting options: 8–512 kB
Default setting: 16 kB