2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 18)

2N® SpeedRoute Configuration 3.1
18
3.1 2N
®
SpeedRoute Configuration
2N ® SpeedRoute is configured via a user-friendly network web interface.
2N ® SpeedRoute is factory set to make administration as easy as possible.
PC Connection
You have received a Fast Ethernet cable for PC connection. The DHCP server is active
in the gateway and assigns your PC an IP address ranging from 192.168.1.100 to
192.168.1.200 by default. When your 2N ® SpeedRoute gets connected to the PC and
reads the IP address, enter the IP address 192.168.1.1 into your web browser to get
access to the 2N ® SpeedRoute web interface for configuration. The following login
dialogue is displayed.
To enter the web interface enter the correct username and password. The default
values for the Administrator are as follows:
Initial username:
Admin
Password: 2n
The Administrator has full access to all device settings except for the Operator
password.
The default values for operator are as follows:
Initial username:
Operator
Password: 2n
The Operator is qualified to operate the time limited connection system – Hotspot. The
Operator has access to the following menus only:
Hotspot > Sale - Time limited connection selling;
Status -
Information about the mobile network connection;
Setting - Operator password settings.
Figure 3.1
Login dialogue
2N ® SpeedRoute