2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 6)

Product Description 1.1
6
1.1 Product Description
The 2N ® SpeedRoute LTE/HSPA+/UMTS/GSM data router has been developed and
manufactured to provide the maximum utility value, quality and reliability. We hope
you will be fully satisfied with 2N ® SpeedRoute for a long time. Therefore, use your
2N ® SpeedRoute for purposes it has been designed and manufactured for, in accordance
herewith.
Basic Features
n 2N ® SpeedRoute allows operate access point to Internet using high speed
technology LTE, HSPA or HSPA+, eventually other technologies with lower
speed data connection. It supports both the local network connection by
Gigabit Ethernet switch and WiFi router supporting all used standards
n The device provides a continuous broadband Internet connection for multiple
users via the Gigabit Ethernet switch or the WiFi network provided by
2N ® SpeedRoute.
n It is possible to connect analogue phone device with FXO port and perform
voice connection using VoIP technology
n The HSPA and HSPA+ versions allows the connection using voice channel of
mobile connection too. The selection of the communication channel is done by
the routing table. This is not possible with the LTE version, the LTE technology
supports the data connection only, for the voice connection the VoIP
technology must be used.
n Product versions are described in section ‘Technical parameters’. Versions are
designed to cover wide selection of technologies and bands (especially LTE
technology uses many different bands, it is not possible to cover it by one type
of device).
n The 2N ® SpeedRoute LTE parameters are designated as LTE2.
n The 2N ® SpeedRoute HSPA and HSPA+ parameters are designated as LTE3.
Caution
n If the menu SETUP>Celular includes the Volume submenu, your
gateway is LTE3.
Advantages of 2N
®
SpeedRoute Use
Fast data connection (LTE and HSPA+ versions)
2N ® SpeedRoute transmits data using the high speed LTE connection (up to 100 Mbps