2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 16)

Telephone Line Connection 2.4
16
2.4 Telephone Line Connection
PBX Connection
Connect 2N ® SpeedRoute to a vacant CO line of your PBX. Configure your PBX
according to the demands for routing outgoing calls to the router. The incoming calls
routing must be set in the PBX too.
Tip
n 2N ® SpeedRoute - is equipped with the FSK-based CLIP function. If your
PBX is able to process the caller’s ID, you are advised to enable this
function.
Telephone Set (Answering Machine,
Coin Telephone Station) Connection
You can connect a standard telephone, an answering machine or any other FXO-
interface terminal to 2N ® SpeedRoute.