2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 68)

Table of Programmable Parameters 3.2
68
SSH - Basic
The SSH (Secure Shell) protocol provides encoded connection with the SSH-
supporting servers. 2N ® SpeedRoute always works in the client mode.
Enable SSH client
Enable the use of the SSH protocol.
SSH server name
Enter the name of the SSH server to which 2N ® SpeedRoute is to be connected.
Client public key
A key generated by 2N ® SpeedRoute (represented by a code), which can be
stored on a disk.
Host public key
A key generated by the server (represented by a code), which can be stored on a
disk.
Always accept remote host key
Enable this field to make the key acceptable before connecting to a server not
used so far. If this field is not Enabled, the server’s public key is checked for
match with an earlier stored key when the server is used repeatedly and if no
match is found, the connection is rejected. This enhances security and prevents
some types of attacks.
Erase host key database
Whenever a change in the server’s public key occurs, delete the stored list of keys
to enable the key check as described above.
Generate private key
Generate a key of your own for server connection. The key is displayed in the
Public key field.
Type
Select a type of the key to be generated: RSA/DSS.
Size
Set the size in bits for the key to be generated.
Setting options: As required by the server operator, we recommend you
to keep the value 1024. After a key of the required
value is stored, the size is reset to 1024.