Settings – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual

Page 94

2N TELEKOMUNIKACE a.s., www.2n.cz

Settings

Figure: Settings Menu

You can change the user password in the

menu. Enter the old password and

Settings

then the new one. The minimum password length and correctness is checked by the
parameters. Save the setting using the

button.

Change password

The menu also displays the installation states of the virtual serial port drivers. If no
drivers have been installed, you cannot use or add serial ports in the

Virtual ports

nu. If the com0com driver is not installed, the 'com0com is not installed' message gets
displayed as shown in Figure. You can install drivers for 32 and 64–bit systems too.
If the installation process is successful, the 'com0com is installed' will be displayed.

Caution

You need the Admin rights for the PC used for com0com installation. If
you do not have such rights currently, the installation will offer you an
Admin login option.

Note

The installation requires

of free disk space at least.

0.5 MB

The menu also includes encryption key settings for server communication, like in the