2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 58)

58
2N TELEKOMUNIKACE a.s., www.2n.cz
®
5. Configuration by SMS
The SMS described in this section are used for basic settings of the terminal. You have
to know the telephone number of the SIM card inserted in your to 2N SmartCOM
®
ensure a reliable function.
Caution
Every SMS sent to must meet all of the conditions 2N SmartCOM
®
mentioned below. Otherwise, the SMS will be ignored, no changes will
be made and an error message will be sent to the SMS–sending
number.
Function Desription
You can configure by sending short text messages to the telephone 2N SmartCOM
®
number of the SIM card inserted in the terminal. Doing this, respect the below listed
parameters to avoid an SMS processing error.
Every configuration SMS must meet the following conditions:
Name of device – 'SC'
Correctly formatted command (INFO, CNF, etc.)
Authorisation password
Correctly defined parameters (refer to the command
parameters)
Upper/Lower Case must be respected
Parameters must be separated with a space
7–bit SMS format (no diacritic symbols)
Maximum length of 160 characters (which is one SMS,
concatenated SMS are not supported)