2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual

Page 100

100

2N TELEKOMUNIKACE a.s., www.2n.cz

of available relays and digital and analogue inputs. Notes can be added if available.
Click on

to change the terminal details.

Edit

Specify in the

in which group the selected terminal shall be visible

Terminal Groups

(i.e. which group shall be allowed to use this terminal). Click on

to add a group.

Add

Click on

to remove a group from the list.

Remove

You can also set communication for the RS–232 and RS–485/M–BUS ports even if the
terminal is connected and used for data transmission. Select the parameters using the
combo boxes and the changes will be effective when saved.

Create Terminal

Click on

next to the filter to create a new terminal.

Add terminal

Figure: Create Terminal

To add a terminal, enter the terminal name, serial number and password. The
parameters are limited and you will be checked during entering. No name or serial
number may be duplicated in the configuration. You will be notified of any duplication
in the configuration. Click on

to create a new terminal.

Create